This Mono / Stereo 2x12" cabinet is ideally suited for use in a stereo guitar rig. This compact, 150 Watt unit is perfect as an extension cabinet for combos and can also support a full-sized head. Want a portable half-stack? The 1936 is the solution...

The Marshall 2266C guitar combo amplifier houses brand new Celestion G12C 25-Watt Greenback speakers....the same exact ones that were specifically developed for the critically acclaimed Limited Edition Jimi Hendrix Super100JH stack. Voiced for a ric...

After the huge success of the JTM45 amplifier, a 2x12" combo version was released to satisfy popular demand and the now legendary 1962 Combo was born. Again the valve rectification, pioneered by Marshall in the early 1960s, was responsible for ...

Marshall’s exclusive, groundbreaking FDD circuitry plus 30 watts of power for killer tones. The MG30FX includes a 10 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. Plus the easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG30FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG30FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

Marshall's MG30FX features their exclusive, groundbreaking FDD circuitry plus 30 Watts of power for killer tones. The MG30FX includes a 10-inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Four digital effects are included, along with cabinet emulation for the line or headphone out. A fine marriage of digital convenience with modern Marshall tone. Groundbreaking FDD circuitry plus 30 Watts of power. Click to enlarge. A single control for digital effects. Line in for playing along with CD/MP3 players; headphone output for private practicing. Add the optional Stompware footswitch for further control. Analog Tube Emulation Marshall's innovative FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The result? An amp that gives you the best of both worlds, not only producing the tone you're looking for, but offering an intuitive and totally programmable way of customizing, storing and accessing your favourite Marshall tones and features. Preset and Manual Modes The MG30FX features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume, allowing you to store the settings for each channel for instant recall. Selecting a channel automatically recalls the settings stored within the channel. The physical position of the front panel controls automatically update. In Manual mode, the amp behaves like any other amp--adjust the controls to your liking on the fly; channel-switching won't recall stored positions (although you can of course save one if you like it). Four Channels On the MG30FX guitar amp combo, the available channels are Clean, Crunch, OD1 and OD2--four different foundations upon which to build your sound. Switching seamlessly between channels is easy with the push button controls, or you can add an optional footswitch. Reverb and Digital effects The MG30FX allows two simultaneous effects--Reverb and one of these four digital effects: Chorus, Phaser, Flanger or Delay. All four effects are controlled by a single knob. Turning clockwise increases the speed on the modulation effects and the level of the delay effect. The delay can be manually set using the front panel Tap button, which allows you to match the delay time to the time between two presses. Headphone/Line Output The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones (when a jack is inserted into the socket the unit's speaker is muted). Line Input The 3.5mm MP3 / Line In socket allows the connection of an external audio source, such as an MP3 or CD player. Plug it in and play along. Stompware Footswitch (Optional) Upgrade your rig with the Stompware footswitch, which provides seamless transitioning between channels, foot control of the tap tempo delay, plus a built-in tuner with LCD display. MG30FX Specs Power (RMS): 30W Channels: 4 Speaker: 1 x 10-inch Weight (kg): 10.8 kg Size (mm): 480 x 420 x 225 (W x H x D) What's in the Box MG30FX Amplifier, Power Cable, Owner's Manual

The 15 watt MG15FX includes an 8 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Marshall’s exclusive, groundbreaking FDD circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG15FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG15FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

The Marshall MG15 provides musicians with more power and more control. The 15 watts of power and an 8 inch speaker provides an added punch to the overall sound, and the amplifier still retains the perfect desirable tone qualities of the MG Series. The MG15 amplifier has the benefit of a 3-band EQ like the ones that can be found on Marshall amps throughout history. Independent Bass, Middle and Treble controls provide the ability to fine-tune every aspect of your tone to your own personal taste.

Delivering 2 distinctive Marshall tone sets, the Marshall MG10 is a 10W guitar combo amplifier with a 6.5 inch speaker. With its honest, clean sparkle and aggressive overdrive, the 10 watts of power is amazingly punchy thanks to its closed-back cabinet design and carefully chosen speaker. In order to further allow the guitarist to tune in to their desired sound, the MG10 guitar amp also features a contour control, allowing the user to adjust the EQ in one single and simple turn of a control. The MG10 also features individual headphone output and line input sockets. The Line In allows you to plug in your MP3 or CD player in and play along with your favorite tunes, and the headphone socket will allow any standard 3.5mm headphone set to be plugged in so you can practice in private.

Next in the MB range is the 30 watt, 1x10" combo. The MB30 takes the budding bass player a step further to hitting the stage with aggression and growl. Like the 15 Watt combo the MB30 has two channels (Modern and Classic) with a shared 3-band passive tone network, featuring a mid Voice control with three modes. The Modern channel has a switchable compressor with variable level control. Both channels are selectable via an optional single footswitch.

Marshall’s exclusive, groundbreaking FDD circuitry plus 30 watts of power for killer tones. The MG30FX includes a 10 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. Plus the easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG30FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG30FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

Marshall's MG30FX features their exclusive, groundbreaking FDD circuitry plus 30 Watts of power for killer tones. The MG30FX includes a 10-inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Four digital effects are included, along with cabinet emulation for the line or headphone out. A fine marriage of digital convenience with modern Marshall tone. Groundbreaking FDD circuitry plus 30 Watts of power. Click to enlarge. A single control for digital effects. Line in for playing along with CD/MP3 players; headphone output for private practicing. Add the optional Stompware footswitch for further control. Analog Tube Emulation Marshall's innovative FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The result? An amp that gives you the best of both worlds, not only producing the tone you're looking for, but offering an intuitive and totally programmable way of customizing, storing and accessing your favourite Marshall tones and features. Preset and Manual Modes The MG30FX features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume, allowing you to store the settings for each channel for instant recall. Selecting a channel automatically recalls the settings stored within the channel. The physical position of the front panel controls automatically update. In Manual mode, the amp behaves like any other amp--adjust the controls to your liking on the fly; channel-switching won't recall stored positions (although you can of course save one if you like it). Four Channels On the MG30FX guitar amp combo, the available channels are Clean, Crunch, OD1 and OD2--four different foundations upon which to build your sound. Switching seamlessly between channels is easy with the push button controls, or you can add an optional footswitch. Reverb and Digital effects The MG30FX allows two simultaneous effects--Reverb and one of these four digital effects: Chorus, Phaser, Flanger or Delay. All four effects are controlled by a single knob. Turning clockwise increases the speed on the modulation effects and the level of the delay effect. The delay can be manually set using the front panel Tap button, which allows you to match the delay time to the time between two presses. Headphone/Line Output The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones (when a jack is inserted into the socket the unit's speaker is muted). Line Input The 3.5mm MP3 / Line In socket allows the connection of an external audio source, such as an MP3 or CD player. Plug it in and play along. Stompware Footswitch (Optional) Upgrade your rig with the Stompware footswitch, which provides seamless transitioning between channels, foot control of the tap tempo delay, plus a built-in tuner with LCD display. MG30FX Specs Power (RMS): 30W Channels: 4 Speaker: 1 x 10-inch Weight (kg): 10.8 kg Size (mm): 480 x 420 x 225 (W x H x D) What's in the Box MG30FX Amplifier, Power Cable, Owner's Manual

The 15 watt MG15FX includes an 8 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Marshall’s exclusive, groundbreaking FDD circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG15FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG15FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

The Marshall MG15 provides musicians with more power and more control. The 15 watts of power and an 8 inch speaker provides an added punch to the overall sound, and the amplifier still retains the perfect desirable tone qualities of the MG Series. The MG15 amplifier has the benefit of a 3-band EQ like the ones that can be found on Marshall amps throughout history. Independent Bass, Middle and Treble controls provide the ability to fine-tune every aspect of your tone to your own personal taste.

Delivering 2 distinctive Marshall tone sets, the Marshall MG10 is a 10W guitar combo amplifier with a 6.5 inch speaker. With its honest, clean sparkle and aggressive overdrive, the 10 watts of power is amazingly punchy thanks to its closed-back cabinet design and carefully chosen speaker. In order to further allow the guitarist to tune in to their desired sound, the MG10 guitar amp also features a contour control, allowing the user to adjust the EQ in one single and simple turn of a control. The MG10 also features individual headphone output and line input sockets. The Line In allows you to plug in your MP3 or CD player in and play along with your favorite tunes, and the headphone socket will allow any standard 3.5mm headphone set to be plugged in so you can practice in private.

Next in the MB range is the 30 watt, 1x10" combo. The MB30 takes the budding bass player a step further to hitting the stage with aggression and growl. Like the 15 Watt combo the MB30 has two channels (Modern and Classic) with a shared 3-band passive tone network, featuring a mid Voice control with three modes. The Modern channel has a switchable compressor with variable level control. Both channels are selectable via an optional single footswitch.

This classic speaker cabinet features four 12" speakers that handle 300 watts and heavy-duty cabinet construction, corner protectors and wheels. Angled front model.

Loaded with 4 - 12" Celestion speakers, this 120 watt cabinet is a perfect match for your favorite Marshall head, like the MG-100DFX!

Basic black is the theme for the M412 A and M412B extensions cabinets. These ultra-affordable 4 x 12" cabinets are equipped with four twelve-inch Eminence AX75 loudspeakers to deliver that unmistakable Marshall sound. The M412A is the angled or...

This Mono / Stereo 2x12" cabinet is ideally suited for use in a stereo guitar rig. This compact, 150 Watt unit is perfect as an extension cabinet for combos and can also support a full-sized head. Want a portable half-stack? The 1936 is the solution...

Marshall’s exclusive, groundbreaking FDD circuitry plus 30 watts of power for killer tones. The MG30FX includes a 10 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. Plus the easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG30FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG30FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

Marshall's MG30FX features their exclusive, groundbreaking FDD circuitry plus 30 Watts of power for killer tones. The MG30FX includes a 10-inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Four digital effects are included, along with cabinet emulation for the line or headphone out. A fine marriage of digital convenience with modern Marshall tone. Groundbreaking FDD circuitry plus 30 Watts of power. Click to enlarge. A single control for digital effects. Line in for playing along with CD/MP3 players; headphone output for private practicing. Add the optional Stompware footswitch for further control. Analog Tube Emulation Marshall's innovative FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The result? An amp that gives you the best of both worlds, not only producing the tone you're looking for, but offering an intuitive and totally programmable way of customizing, storing and accessing your favourite Marshall tones and features. Preset and Manual Modes The MG30FX features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume, allowing you to store the settings for each channel for instant recall. Selecting a channel automatically recalls the settings stored within the channel. The physical position of the front panel controls automatically update. In Manual mode, the amp behaves like any other amp--adjust the controls to your liking on the fly; channel-switching won't recall stored positions (although you can of course save one if you like it). Four Channels On the MG30FX guitar amp combo, the available channels are Clean, Crunch, OD1 and OD2--four different foundations upon which to build your sound. Switching seamlessly between channels is easy with the push button controls, or you can add an optional footswitch. Reverb and Digital effects The MG30FX allows two simultaneous effects--Reverb and one of these four digital effects: Chorus, Phaser, Flanger or Delay. All four effects are controlled by a single knob. Turning clockwise increases the speed on the modulation effects and the level of the delay effect. The delay can be manually set using the front panel Tap button, which allows you to match the delay time to the time between two presses. Headphone/Line Output The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones (when a jack is inserted into the socket the unit's speaker is muted). Line Input The 3.5mm MP3 / Line In socket allows the connection of an external audio source, such as an MP3 or CD player. Plug it in and play along. Stompware Footswitch (Optional) Upgrade your rig with the Stompware footswitch, which provides seamless transitioning between channels, foot control of the tap tempo delay, plus a built-in tuner with LCD display. MG30FX Specs Power (RMS): 30W Channels: 4 Speaker: 1 x 10-inch Weight (kg): 10.8 kg Size (mm): 480 x 420 x 225 (W x H x D) What's in the Box MG30FX Amplifier, Power Cable, Owner's Manual

The 15 watt MG15FX includes an 8 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Marshall’s exclusive, groundbreaking FDD circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG15FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG15FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

The Marshall MG15 provides musicians with more power and more control. The 15 watts of power and an 8 inch speaker provides an added punch to the overall sound, and the amplifier still retains the perfect desirable tone qualities of the MG Series. The MG15 amplifier has the benefit of a 3-band EQ like the ones that can be found on Marshall amps throughout history. Independent Bass, Middle and Treble controls provide the ability to fine-tune every aspect of your tone to your own personal taste.

Delivering 2 distinctive Marshall tone sets, the Marshall MG10 is a 10W guitar combo amplifier with a 6.5 inch speaker. With its honest, clean sparkle and aggressive overdrive, the 10 watts of power is amazingly punchy thanks to its closed-back cabinet design and carefully chosen speaker. In order to further allow the guitarist to tune in to their desired sound, the MG10 guitar amp also features a contour control, allowing the user to adjust the EQ in one single and simple turn of a control. The MG10 also features individual headphone output and line input sockets. The Line In allows you to plug in your MP3 or CD player in and play along with your favorite tunes, and the headphone socket will allow any standard 3.5mm headphone set to be plugged in so you can practice in private.

Next in the MB range is the 30 watt, 1x10" combo. The MB30 takes the budding bass player a step further to hitting the stage with aggression and growl. Like the 15 Watt combo the MB30 has two channels (Modern and Classic) with a shared 3-band passive tone network, featuring a mid Voice control with three modes. The Modern channel has a switchable compressor with variable level control. Both channels are selectable via an optional single footswitch.

Marshall’s exclusive, groundbreaking FDD circuitry plus 30 watts of power for killer tones. The MG30FX includes a 10 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. Plus the easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG30FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG30FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

Marshall's MG30FX features their exclusive, groundbreaking FDD circuitry plus 30 Watts of power for killer tones. The MG30FX includes a 10-inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Four digital effects are included, along with cabinet emulation for the line or headphone out. A fine marriage of digital convenience with modern Marshall tone. Groundbreaking FDD circuitry plus 30 Watts of power. Click to enlarge. A single control for digital effects. Line in for playing along with CD/MP3 players; headphone output for private practicing. Add the optional Stompware footswitch for further control. Analog Tube Emulation Marshall's innovative FDD (Frequency Dependent Damping) circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The result? An amp that gives you the best of both worlds, not only producing the tone you're looking for, but offering an intuitive and totally programmable way of customizing, storing and accessing your favourite Marshall tones and features. Preset and Manual Modes The MG30FX features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume, allowing you to store the settings for each channel for instant recall. Selecting a channel automatically recalls the settings stored within the channel. The physical position of the front panel controls automatically update. In Manual mode, the amp behaves like any other amp--adjust the controls to your liking on the fly; channel-switching won't recall stored positions (although you can of course save one if you like it). Four Channels On the MG30FX guitar amp combo, the available channels are Clean, Crunch, OD1 and OD2--four different foundations upon which to build your sound. Switching seamlessly between channels is easy with the push button controls, or you can add an optional footswitch. Reverb and Digital effects The MG30FX allows two simultaneous effects--Reverb and one of these four digital effects: Chorus, Phaser, Flanger or Delay. All four effects are controlled by a single knob. Turning clockwise increases the speed on the modulation effects and the level of the delay effect. The delay can be manually set using the front panel Tap button, which allows you to match the delay time to the time between two presses. Headphone/Line Output The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones (when a jack is inserted into the socket the unit's speaker is muted). Line Input The 3.5mm MP3 / Line In socket allows the connection of an external audio source, such as an MP3 or CD player. Plug it in and play along. Stompware Footswitch (Optional) Upgrade your rig with the Stompware footswitch, which provides seamless transitioning between channels, foot control of the tap tempo delay, plus a built-in tuner with LCD display. MG30FX Specs Power (RMS): 30W Channels: 4 Speaker: 1 x 10-inch Weight (kg): 10.8 kg Size (mm): 480 x 420 x 225 (W x H x D) What's in the Box MG30FX Amplifier, Power Cable, Owner's Manual

The 15 watt MG15FX includes an 8 inch speaker, four switchable channels, and a 3-band EQ that lets you shape your tone. Marshall’s exclusive, groundbreaking FDD circuitry gives the MG4 Series the unbelievable depth of sound and unique feel of their legendary, all-tube amps. It does this by emulating the way an all-tube power amp interacts with the speaker(s) it is driving. The easy to use panel controls include gain, followed by a three-band EQ, volume and Master Volume. On the MG15FX guitar amp combo, the 4 channels are Clean, Crunch, OD1 and OD2. Switching seamlessly between channels is easy with the push button controls. Plus the amp features two modes: Preset and Manual. Preset mode stores the position of all the controls except the master volume while the manual mode is the actual physical position of the controls. Settings for each channel can be customized and saved for instant recall. The MG15FX provides two simultaneous effects, Reverb and one of these four digital effects (Chorus, Phaser, Flanger or Delay). The Delay can be manually set using the front panel Tap button. The combination line out/headphone out features speaker cabinet emulation, giving you full Marshall sound when recording or practicing through headphones. A line input allows you to play along with MP3 and CD players. The optional Stompware footswitch provides seamless transitioning from sound to sound and tap tempo, plus a built-in tuner with LCD display.

The Marshall MG15 provides musicians with more power and more control. The 15 watts of power and an 8 inch speaker provides an added punch to the overall sound, and the amplifier still retains the perfect desirable tone qualities of the MG Series. The MG15 amplifier has the benefit of a 3-band EQ like the ones that can be found on Marshall amps throughout history. Independent Bass, Middle and Treble controls provide the ability to fine-tune every aspect of your tone to your own personal taste.

Delivering 2 distinctive Marshall tone sets, the Marshall MG10 is a 10W guitar combo amplifier with a 6.5 inch speaker. With its honest, clean sparkle and aggressive overdrive, the 10 watts of power is amazingly punchy thanks to its closed-back cabinet design and carefully chosen speaker. In order to further allow the guitarist to tune in to their desired sound, the MG10 guitar amp also features a contour control, allowing the user to adjust the EQ in one single and simple turn of a control. The MG10 also features individual headphone output and line input sockets. The Line In allows you to plug in your MP3 or CD player in and play along with your favorite tunes, and the headphone socket will allow any standard 3.5mm headphone set to be plugged in so you can practice in private.

Next in the MB range is the 30 watt, 1x10" combo. The MB30 takes the budding bass player a step further to hitting the stage with aggression and growl. Like the 15 Watt combo the MB30 has two channels (Modern and Classic) with a shared 3-band passive tone network, featuring a mid Voice control with three modes. The Modern channel has a switchable compressor with variable level control. Both channels are selectable via an optional single footswitch.

This classic speaker cabinet features four 12" speakers that handle 300 watts and heavy-duty cabinet construction, corner protectors and wheels. Angled front model.

Loaded with 4 - 12" Celestion speakers, this 120 watt cabinet is a perfect match for your favorite Marshall head, like the MG-100DFX!

Basic black is the theme for the M412 A and M412B extensions cabinets. These ultra-affordable 4 x 12" cabinets are equipped with four twelve-inch Eminence AX75 loudspeakers to deliver that unmistakable Marshall sound. The M412A is the angled or...

This Mono / Stereo 2x12" cabinet is ideally suited for use in a stereo guitar rig. This compact, 150 Watt unit is perfect as an extension cabinet for combos and can also support a full-sized head. Want a portable half-stack? The 1936 is the solution...